Top of page. Skip to main contents. Skip to main menu. Skip to footer.

Slitter Scorer Model[ Corrugating Machinery ] [ Printing & Paper Converting Machinery ]

Slitter Scorer model 57H-V/57H-III

Mitsubishi Heavy Industries Machinery Systems's Auto Slitter Scorer use advanced technology to give High Speed, High flexibility, Small lot control, and Quick Setups!

New Model 57H-V

Short setup time with servo-motorized plunge head movement.
This means quick order change with less waste paper.
Positioning accuracy of each head: +/- 0.5mm
Automatic web guide ensures stgable slitting and saves waste trim.(option)
Auto knife height-adjusting device enables easy maintenance.

57H-V Auto Slitter Score
57H-III Auto Slitter Score

Standard/Option

Slide horizontally to see the table.

Machine Type 57H-V Auto slitter scorer 57H-III Auto slitter scorer
Max. Machine Speed 400m(15.75”)/min 400m(15.75”)/min
Machine Width 1,800mm (70.87”), 2,000mm (78.74”), 2,200mm (86.61”), 2,500mm (98.43”) 1,800mm (70.87”), 2,000mm (78.74”), 2,200mm (86.61”), 2,500mm (98.43”), 2,800mm (110.24”)
Max. Box-out Number 7box-out 8box-out (note)
Min. Slitting Width 190mm (7.48”) 160mm (6.30”)
Min. Scoring Width 0mm (Min. Width of same shaft: 120mm (4.72”))
Standard
  • Lower knife slitting
  • Driving shafts for slitter knife and lower scorer head
  • Rising and lowering control for each slitter knife and upper scorer head
  • Vacuum paper dust removal device
  • Individual knife support roll
  • Automatic individual resharpening device for each slitter knife
  • Single unit operation control system
  • Double-run control device for No.1 and No.2 unit (for scorer only)
  • Lower knife slitting
  • Driving shafts for slitter knife and lower scorer head
  • Rising and lowering control for each slitter knife and upper scorer head
  • Vacuum paper dust removal device
  • Individual adjusting device of slitting depth
  • Automatic individual resharpening device for each slitter knife
  • Single unit operation control system
  • Double-run control device for No.1 and No.2 unit (for scorer only)
Option
  • Edge cut device (56-2G)
  • Steering guide
  • Edge cut device (56-2G)
  • Individual knife support roll
  • For 2,500-2,800mm width machine.

Specifications and designs are subject to change without prior notice and without any obligation on the part of manufacturer.

Products